A car that uses a rear-wheel-drive system has more traction and stability when driving on uneven terrain. There are two acceptable rotation patterns for all wheel drive vehicles. A. This pattern is most commonly used for front-wheel drive vehicles.

Rear tires are moved to the forward axle and kept on the same side of the vehicle while the front tires are moved to opposite sides of the rear axle. You should rotate all tires in your front-wheel drive in a particular pattern or as your owners manual recommends. Maintaining Correct Alignment Rear tires are moved to the forward axle and kept on the same side of the vehicle while the front tires are moved to opposite sides of the rear axle.

Rear-wheel drive or AWD/four-wheel drive : Left rear goes to right front. Use a torque wrench to tighten the lug nuts in a star pattern to the foot pounds recommended by the manufacturer. Most all wheel drive cars and trucks tend to have a rear wheel drive bias and when rotating tires on AWD vehicles the patterns are usually similar to rear wheel drive patterns. Front-wheel drive, all-wheel drive, or rear-wheel drive vehicles are available, with directional or non-directional tires. Advertisement.

Front-wheel drive : Rotate the tires in a forward cross pattern. An AWD vehicle is one with a powertrain that can provide power to all its wheels, whether on-demand or full-time. To rotate the tires on an all-wheel drive vehicle, you must follow an X pattern: the left front tire will go to the right rear and vice versa; the same goes for the right front tire, which will go to the left rear. Front-wheel drive : Rotate the tires in a forward cross pattern. For vehicles that are 4-wheel, all-wheel, or rear-wheel drive, the rearward cross pattern is recommended. If you dont, the tires will wear unevenly and prematurely. Todays performance tire and wheel trends have provided the need for two additional tire rotation patterns. Lets take a look at tire rotation patterns recommended by the standardizing body of the tire industry, (REAR-WHEEL OR 4-WHEEL DRIVE VEHICLES): Both rear axle tires move directly forward to the front axle while the spare tire moves to the right side of the rear axle. A five tire forward cross tire rotation is for front wheel drive vehicles with uniform tires that feature non-directional patterns. or rear-wheel drive, the rearward cross pattern is recommended. Rear Wheel Drive Tire Rotation. Front-wheel-drive tire rotation pattern: With a front-wheel-drive (FWD) vehicle, the general rule is to rotate the front tires straight back to the rear. It is also used on some four-wheel drive (4WD) vehicles with a solid rear axle and equal-sized wheels/tires front and back. There are several tire rotation patterns available, and the one that is best for your automobile is determined by the model of the car you have and the kind of tires you use. The left rear goes to the right front and the right rear goes to the left front. In the last months of 2010, all-wheel-drive autos accounted for more than 33% of new passenger car sales. AWD cars should aim to get tire rotations more frequently, at every 3,000 to 5,000 miles. In a car that uses rear-wheel drive, whether part-time or full-time, the engine delivers power to the rear wheels where the tires pull the car forward, leaving the front wheels to steer and maneuver the vehicle. Which tire rotation pattern is best? Most AWD systems supply power mainly to one set of wheels, rear or front, at a time. Learn how to rotate your tires with one jack. The spare then takes the place of the back right tire. Tire Position. This is because the rear wheels are what receive the majority of wear in these cases. Rearward cross. The rearward cross is the more preferable method since it better distributes the tires around the car or truck over time. First, take the time to make sure your vehicle is secured to prevent it from rolling away during the rotation. The rear wheel tires are moved directly forward, staying on the same side, while the front wheel tires are sent to the rear, but diagonally to their opposing side. For Rear-Wheel Drives, the two rear tires stay on the same side and move forward. This means that the left front goes to the left rear and the right front goes to the right rear. However, check your owner's manual to see if there is a recommended rotation scheme. Tire rotation should in most cases be done by a tire specialist. Rear tires are moved to the forward axle and kept on the same side of the vehicle while the front tires are moved to opposite sides of the rear axle. The rear right one then crosses to the front left axle. So,X-pattern rotation is the rotation pattern for AWD/4WD. Doing so can prolong their life, spread tire wear evenly on all four tires, and help reduce the risk of sudden tire failure. The most adopted pattern is the forward cross pattern. The front left tire is kept as a spare, and the front right tire replaces the back left. Tire rotation Methods. On vehicles with directional tires, the front and rear tires switch positions unless the tire is demounted from the rim so the direction can be changed. Then its time to rotate your tires.

Our team is available Monday to Saturday from 10:00 am to 7:00 pm (Paris time) to answer your questions in French, Italian or English. Rear left wheel to the If the IMU senses the motorcycle is leaned over when the brakes are used, the ABS unit will adjust the brake pressure to an optimal amount to help maintain braking force and tire grip.

Finally, the right rear tire goes to the left front position. All Wheel Drive Tire Rotation Pattern. In this rotational pattern, we see the complete opposite of the forward cross pattern. In this case, the spare tire is mounted as the right rear tire.

Rear-wheel-drive tire rotation pattern: What if your car has power sent to the rear wheels? During rotation, each tire and wheel is removed from your vehicle and moved to a different position to ensure that all tires wear evenly and last longer. Your recommended rotation pattern depends on the type of car you drive. These are some of the different tire rotation patterns and how to determine which one will be most beneficial to your car.

First, the back left and back right tires replace the front left and front right tires respectively. When the IMU detects the rear wheel lifting from extreme braking forces, the ABS control module will adjust the front brake pressure to reduce the rear wheel lift. How do you rotate tires on an all-wheel drive vehicle? After that, loosen the nuts and then jack up the car. For vehicles that are 4-wheel, all-wheel, or rear-wheel drive, the rearward cross pattern is recommended. To rotate non-directional tires, use the cross pattern. The This pattern is for four-wheel, all-wheel, or rear-wheel drive vehicles. To start, the rearward cross pattern is used on cars that are either 4-wheel, all-wheel, or rear-wheel drive. Step 10: Lower the vehicle and torque the lug nuts. The rear tires are moved to the forward axle while being kept on the same sides of the vehicle. Here, the left rear tire crosses to the front right axle. This tire rotation pattern is popular with 4-wheel drive vehicles. What is the rotation pattern for directional tires? The rear tires are moved straight forward. Rear and Four-Wheel Drive. 3. With rear-wheel drive, do exactly the opposite. Choose from the four below to see which works best for your car. Youll move: Front left wheel to the rear right. Front-wheel drive : Rotate the tires in a forward cross pattern. What Tire Rotation Pattern Should I Utilize? The front tire is moved to the rear axles but on opposite sides in a cross pattern. Rear and four-wheel drive vehicles should use the alternative X or rearward cross rotation pattern. But if the sizes are different, tires will be equipped with different offsets, here we will recommend the 5-way tire rotation that will be discussed further in this article. The front tires switch sides and move to the back. For cars with rear-wheel drive, move the front tires to the opposite sides of the rear: left-front to right-rear and right-front to left-rear. The most common types of all-wheel drive are: The back tires are moved to the front diagonally, while the left front tire is rotated to the left side of the rear axle. Forward Cross. The "Modified Cross Pattern" can be performed on any front- or rear-wheel drive vehicle equipped with four non-directional tires (directional tires must be rotated front to rear only). The tread pattern on non-directional tires is designed so that they can be mounted on any wheel. The left rear tire moves to the right front, and the right rear tire moves to the left front. The rearward cross and X-pattern . This pattern is used to rotate tires 4-wheel drive, AWD, and rear-wheel drive. Asymmetric tires are treated as non-directional as long as they're mounted on the wheels correctly ("outside" side facing outward). Once youre certain all the wheels are seated flat against your hubs, its safe to lower the vehicle. The left rear goes to the right front and the right rear goes to the left front.

The rearward close is a 5 wheel rotation pattern for both rear and four-wheel drive vehicles. Move the rear tires up front without changing their sides, and swap the front tires left for right when you bring them to the rear. On four-wheel drive and all-wheel drive vehicles, the recommended rotation pattern is a Double X so the right front and left rear tires switch positions as do the left front and right rear. X pattern or cross pattern places the front and back tires on opposite sides. Rearward Cross. Switch sides when moving the rear tires to the front of the vehicle. Place the stands under the vehicle for extra support and remove the jack. Rear-wheel drive or AWD/four-wheel drive : Tire Rotation Pattern: For Tires That Are Of Uniform Size And Non-Directional: 1. Its important to rotate your tires according to the correct tire-rotation pattern. Forward Cross (Front-Wheel Drive Vehicles): Rear tires are moved diagonally to opposite sides on the front axle while the right front tire becomes the new spare tire. The tires on an AWD vehicle should be rotated every 7,500 miles, according to the manufacturers recommendation.

There are two acceptable rotation patterns for rear wheel drive vehicles. The rearward cross and X-pattern. Always talk with a mechanic first or read the cars manual to know which rotation pattern your vehicle needs. But remember your power transfer in AWD, 62% Rear/38% Front.

The opposite is true for a rear-wheel-drive vehicle, according to TIA, so the front tires should be crossed to the back while the rear tires are rotated straight to the front. Rear-Wheel Drive Tire Rotation Pattern: If you have a RWD car, the opposite is true. This means that the left front goes to the left rear and the right front goes to the right rear. Rear-wheel or all-wheel drive, staggered setup (rear tires larger than front), directional tires: Rotation not possible without unmounting and remounting tires on wheels. Front-Wheel Drive Tire Rotation Pattern: The front tires should be moved to the back of the car and should remain in the same left/right positions. Call +44 (0)330 3530238 How to Rotate Tires: 4 Tire Rotation Patterns. The X pattern recommended previously is for a four-tire rotation pattern. This means that the left front goes to the left rear and the right front goes to the right rear. Also, if your vehicle is equipped with a tire pressure monitoring system, it will need to be reset after each tire rotation.

The rear tires are typically crossed to the front. TIRE ROTATION PATTERNS. 2. Rear-wheel drive or AWD/four-wheel drive : Left rear goes to right front. The "Front-to-Rear" (Figure D) pattern may be used for vehicles equipped with the same size directional wheels and/or directional tires. How often should I rotate my tires on an all-wheel-drive car? What is the best tire rotation pattern? For vehicles that are 4-wheel, all-wheel, or rear-wheel drive, the rearward cross pattern is recommended. If your vehicle is rear-wheel or 4-wheel drive with non-directional tires and a full-size matching spare, the pattern at right above can be used. This pattern is often used on vehicles with front-wheel drive, as it helps to prevent the front tires from rubbing on the suspension components. Rearward Cross. Front right wheel to the rear left. Rotation Method 1 Rotation pattern is different for front-wheel drive (FWD) and rear-wheel drive (RWD). If the tires are all same in size and shape, the rotation pattern could be directional in the form of front wheel drive or rear wheel drive. The left rear goes to the right front and the right rear goes to the left front. Free rolling axle tires are crossed and installed to the drive axle, while the drive axle tires are brought straight to the free rolling axle (without crossing).